ICOP-MM
Mity-Mite Module




Specifications:

  • Chipset: DM&P (ALi) M6117D (Embedded CPU, 386SX-36 compatible)
    Data Bus: 16-bit
    Bus Speeds: 8 MHz, programmable up to 16 MHz
    Watchdog Timer: from 30.5µs to 512 seconds
    Real Time Clock with Lithium battery backup
  • BIOS: AMI BIOS
  • RAM: 2 MB onboard
  • On board ethernet: Realtek 8019AS single chip
    Full-duplex transfer mode, doubles effective bandwidth
    NE2000 compatible with built-in 16KB RAM buffer Throughput: 10Mbps
  • I/O: One RS232 port
    One 44-pin Enhanced IDE interface
    16-bit GPIO
    Power LED
    Active LED
  • OS: With DOS pre-installed
  • SSD: Support Built-in Flash Disk up to 350KB or support
    MicroDiskModule through IDE interface from 4MB up to 256MB
  • Connector: 20-pin box header for 16-bit GPIO
    10-pin box header for RS-232 port
    5-pin header for AT-keyboard
    2-pin MOLEX power connector
    2-pin connector for speaker RJ-45 connector for 10BASE-T
  • Expansions: Specific ISA bus signal interface
  • Power Requirements: single voltage +5 V @ 400 mA
  • Dimensions: 80 (L) x 50 (W) mm.
  • Operating Temperature: -20 ~ +60° C

Expansion Series:
  • ICOP-0092: IDE Interface Development Kit from 40 pin to 44 pin